Sea to Summit Comfort Plus Rectangular Insulated Inflatable Sleeping Mat - Regular
or make 4 interest-free payments of $62.49 AUD fortnightly with More info
The Sea to Summit Comfort Plus Sleeping Mats are one of the most sensitive and comfortable sleeping pads available.
The Comfort Plus series are formed using dual layer construction—two independent, offset high resolution layers. The higher resolution cell matrices allow greater sensitivity by distributing your body weight and shape over more small cells. The air sprung cells on the top and bottom layers are offset to give more uniform insulation, preventing cold spots.
The mat’s firmness can be more finely tuned with Dual Layer construction – The bottom layer is inflated firm for height, then the top layer inflated to the desired comfort level.
If either layer is punctured, the other layer will provide redundancy, keeping you off the ground and sleeping uninterrupted.
The Comfort Plus is available in Small, Regular and Large sizes (tapered shape), Regular Rectangular and Large Rectangular sizes, all of which are available with or without insulation.
Features and Specifications
Length: 183 cm
Width: 56 cm
Inflated Depth: 6.3 cm
Rolled Size: 10 x 17 cm
Weight: 825 grams / 29 oz
Number of Air Sprung Cells: 596
Includes: Stuff sack and repair kit
Frequently Asked Questions
Q. WILL MOISTURE BUILD UP DAMAGE MY MAT IF I INFLATE IT WITH MY BREATH?
A. Absolutely not. We have gone to extreme lengths to ensure that the fabrics and coatings that we have used in the construction of our Air Sprung Cell Mattresses can easily withstand the moisture build up that could occur from inflating them with your breath. We have also carefully treated our internal coatings to ensure that microbial life cannot replicate in a moisture rich environment, thus removing the chance that your mat may become moldy.
Q. WHAT’S THE BEST WAY TO INFLATE MY AIR SPRUNG CELL MATTRESS?
A. STS Air Sprung Cell Mattresses can be inflated in a number of ways. We have been very careful in using a TPU laminate on the internal face of the fabrics that has been manufactured with an anti-microbial treatment. This means that you are able to blow your mattress up by mouth without risk of mould growth inside the mattress. If you prefer not to huff and puff when setting up camp, we have created the Jet Stream Pump Sack and the Air Stream Dry Sack to make your life easier.
Q. HOW DO I REPAIR MY AIR SPRUNG CELL MAT?
A. Every mattress comes with a repair kit containing a number of patches. These self-adhesive repair patches can be used on holes up to about 2 mm in diameter with complete confidence. If you have a hold larger than this, please contact STS enquiries as to the best way to effect a repair.
Q. WHAT DO I DO IF WATER OR MOISTURE GETS TRAPPED INSIDE MY MATTRESS?
A. Having a small amount of moisture trapped inside your mattress is not a major issue, and the moisture will not damage your mat in anyway because of the anti-microbial TPU lining. You should, however, give your mattress an opportunity to dry out when you get a chance. The best way to achieve this is to hang the mat in a warm and dry environment with the valve open.
Q. WHAT’S THE BEST WAY TO CLEAN MY STS MATTRESS?
A. Mild soap and water is the best way to try and clean any dirt or grime off your mattress. The external coating on the face fabric will ensure that cleaning is quick and effective. Be careful not to use any strong cleaning products or bleaches, as these will damage the fabrics and potentially compromise the integrity of the mattress.